Click any of the links below to see more information
Why are there fence panels shown that do not have corresponding gates?
How do I change the default construction method from placing the posts on the outside of the fence to placing the posts on the inside of the fence?
Why are the defaults set to cedar fencing and not to pine?
How do I change the height of a Fence?
Can the length of individual fence posts be changed?
How can I change fence or gate materials?
Not all fence panels have associated gates.
Return to Top
Most home owners associations require the posts to show on the inside of the fence and the panel to face the neighbors; however the default setting in the system will place the posts on the outside. To move the posts to the inside of the fence, while in the Plan View, click on Modify, then click on Reverse. Click on the fence area you wish to change.
Materials are listed in alphabetical order. When a fence section is added, a dialog box will appear. The dialog box displays all the fence options available in your default store.
The height of the fence is based on the selected fence material. While in Plan View, click on the Modify button, then click on the side of the fence you want to modify. A dialog box containing all selectable fence panels by dimensions will be displayed for your default store. Select the panel with the appropriate dimensions to get the desired height. You can also double click on the side of the fence you wish to modify, which will display a dialog box with the selectable fence panels by dimensions.
No. Individual fence post lengths cannot be changed. The system is designed to base post length on panel height.
To change the materials for a fence or gate, use one of the following procedures:
Either of these procedures will display the Fence Properties dialog (if a fence section was chosen) or the Gate Properties dialog (if a gate was chosen).
NOTE: The process for changing fence materials only changes the section that was selected in step 2. To change materials for multiple fence sections, repeat the steps shown above.